SEARCH
Hot product
Recommended products
Contact
Address:No.15, First floor, Lijiao Commercial plaza, Nanzhou Road,Haizhu district ,Guangzhou City, China
Tel:86 020 89081205
Mobile phone:13808875271
E-mail:
hundom@hotmail.com
hundom@hotmail.com
Fax:86 020 34139849
Url:www.mo6v09.cn
Filter series
micro filter
Microporous membrane filter
Material: stainless steel 304 / 316L
Model: 10 × 1 core, 10 × 3 core, 20 × 1 core, 20 × 3 core
Connection: Quick-fit clamp connection
Core bayonet: 226
Uses: used in dairy, food, beer, beverage, pharmaceutical, cosmetics and other industrial fields.
If you have any questions about filter ordering, malfunction or maintenance, please contact us through the following methods.
If you are in a hurry, please call us.0086-13724810788 Nicole chen
- 尚宮家飾館
- 86403237
- 0086-13724810788
- 0086-13724810788
- hundom@hotmail.com
Stainless steel polypropylene millipore membrane filter for wine filter
This filter can be applied for most particles so it is broadly for precision filter and sterilization.
- the filter cylinder is 1core,3core,5core,7core,9core,11core,13core,15core
- the length of folding filter core is 10,20,30,40
- the material of the filter core is PTF,Pplysulfone,nylon,pp,acetyl cellulose
- the diameter of the filter hole is 0.1μm,0.22μm,0.45μm,1μm,3μm,5μm,10μm,30μm,60μm,and it is selective as hydrophilic (suitable for gas) and hydrophilic (suitable for liquid) according to your requirement.
Products Advantages
- Adopt to mechanical polishing,material liquid touch area Ra<0.4um,absolute health level of polishing , can select all series electrolytic polishing.
- It can increase the vent hole and dreain hole diameter Effectively , and can connect 8mm pipe.
- Drain valve independent from the exhaust valve thread joint sets and pagoda,operating is more convenient.
- Adopt to hing segmented clamp ,20% higher than an ordinary card hoop pressure,maximum pressure up to 1.0Mpa.
- Supporting feet adopt to strengthening threaded,not easy sliding teeth;Install a adjustable nut at the bottom of the leg , filter's height can be adjustment .
Technical Parameters
| Model Table | Filter element No | Filter element length | Material of shell | Filter element interface | Connect way | Materail of Seal |
| 1 element | 5" | 304 | 226 | Tri-clamp | Silicone rubber | |
| F-GSL | 10" | 316L | Flat pressing | Flange | Fluorine rubber | |
| 20" | Threaded | PTEE | ||||
| 30“ | EPDM |
