hundom@hotmail.com
Magnetic mixer
Material: Stainless steel 304 / 316L
Pump shaft position: vertical
Model: Ordinary motor
Uses: strong stirring
Working temperature: -30-200
Working pressure: 0.09-0.8MPa
Application: food, dairy, pharmaceutical, beverage, chemical, etc.
If you have questions about magnetic stirrer ordering, malfunctions or maintenance, please contact us via the following methods.
If you are in a hurry, please call us 0086-13724810788 Nicole chen
- 尚宮家飾館
- 86403237
- 0086-13724810788
- 0086-13724810788
- hundom@hotmail.com
Working Principle
Bottom entry magnetic mixer is composed of inside magnet (with impeller ), separation sleeve, living bearing .out magnet ,driving unit ,the wetted patrs are made of stainless steel 304 or stainless steel 316L(for selection).
Opening hole at the bottom of tank ,install the separation sleeve to the bottom through welding directly or welding flange connection. Living bearing and inside magnet (with impeller) are inside of tank. The driving unit deive the out magnet rotating synchronously .the out magnet drive the inside magnet rotating sysnchronously by strong magnetic force to achieve the mixing effect.
Advantage
1.Silence seal (separation sleeve) instead of dynamic seal (driven shaft),which can completely solve the leaking, problem of mechanical seal.
2.Simple structure,low maintenances cost, easy for disassemble ,easy for cleaning,no dead spot.
3.Bottom entry mixing, can work under little liquid material,the special impeller can be applicated for stirring and mixing for various materials.
4.Standard design makes it's quality spare parts am be interchanged on different mixers
Application
Maindly be used in stainless steel reaction tanks, fermentation tank,feeding tank. storage tanks mixing for manufacturing following material: Infusion solutions, Small injections,,vaccines, blood products, insulin, oral liquid,etc.
Mixing way
The mixing impeller produce a vortex .which sucking the soluble powder or liquid towards to the impeller, after reaching the impeller, the fluid flows in a radial direction rush to the tank wall by the centrifugal force of impeller. After reaching the tank wall,the fluid travels upwards and then circulation down to the suction end of impeller. The overall bulk movement and the mixing action around the mixer ensure that a homogeneous,mixing, dissolving ,dispersing, is achieved.
Technical Parameters
| Model | Power(kw) | Volume(L) | Speed(r/min) |
| HD-20 | 0.2 | 50-200 | 120-1400 |
| 0.4 | 50-200 | ||
| HD-40 | 0.55 | 200-500 | |
| 0.75 | 200-500 | ||
| HD-60 | 1.1 | 500-1000 | |
| 1.5 | 500-1000 | ||
| HD-80 | 1.5 | 800-2000 | |
| 2.2 | 800-2000 | ||
| HD-100 | 3 | 1500-3000 | |
| 4 | 1500-3000 | ||
| HD-120 | 4 | 2000-5000 | |
| 5.5 | 2000-5000 | ||
| HD-140 | 7.5 | 3000-100000 |
Product Show
About Hundom
Guangzhou Hundom Machinery Equipment Co., Ltd. has been manufacturing colloid mill, jacketed kettle, rotor pump, mixing tank and other machinery equipment for 14 years , putting quality as our first consideration. We own a team with rich experience in the field, if you have any question, contact us for the professional answer.
